Perma automatic single-point lubrication system STAR CONTROL Time-Impulse
Single-point lubrication system which doses optimal lubricant depending on operating hours or by impulses.
The perma STAR CONTROL is used to lubricate roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals and chains. Due to the precise lubricant metering, perma STAR CONTROL is ideally suited for lubrication of electric motors with specified lubricant quantities. The system is protected against dust and water jets, subject to correct assembly of the individual parts (IP65).
In contrast to the perma STAR VARIO (with battery pack), the perma STAR CONTROL is supplied with external power via cable. In addition, the operating status can be transmitted to a PLC via this connection.
The two integrated operating modes TIME and IMPULSE allow flexible use. In the TIME mode, lubricant dispensing is dependent on operating hours. In the IMPULSE mode, a precisely defined quantity is dispensed as soon as a voltage is applied.
The perma STAR CONTROL consists of an electromechanical drive and an LC with 60, 120 or 250 cm³ of lubricant. The required mode is set on the drive. Lubrication is precise, temperature-independent and with up to 6 bar counter pressure.
Please contact us for technical drawings.Brand: Perma