Gatelock securtiy lock installation manuals

You can easily install Gatelock security locks on your commercial vehicle by referring to the installation manual supplied. The method of installation will depend on the type of lock and commercial vehicle. All the manuals are listed below.

Gatelock Van Medium Lock

You can easily install the Gatelock Van Medium van lock on the doors of your commercial vehicle by referring to the installation manual supplied and using the drilling template. The installation height is different for each vehicle.

There are two parts to the van lock. The outer part is installed on the outer door using four 8 mm bolts. You secure the lock button to the inner door using two 6 mm bolts or, in the case of a sliding door, on the side of the van. The bolts go through the door of your van and are tightened on a steel mounting plate.

Gatelock van medium lock

Vehicle-specific manuals:

Gatelock van small commercial vehicle lock

Gatelock Van Small, F-series lock

It takes just 15 minutes to install this van lock on both rear doors and side sliding doors on any type of vehicle. You can easily install the Gatelock security lock yourself – using an Allen key and a drill – by drilling a single hole.

Gatelock Van small P-serie slot
Dit bestelwagen slot plaats  je eenvoudig zelf in 5 minuten zonder speciaal gereedschap. Je hoeft hierbij niet door het plaatwerk te boren.

Geschikt voor de volgende bestelwagens: Mercedes Sprinter, Volkswagen Crafter, Citroën Jumper, Peugeot Boxer, Fiat Ducato, Opel Movano, Renault Master en Nissan NV400.

Gatelock Van Small T-serie slot
Dit beveiligingsslot kun je alleen op de laadklep van een bakwagen monteren. Het slot is eenvoudig zelf te bevestigen door één gat te boren. Universele uitvoering.

Gatelock van large lock for box trucks

You can easily install the Gatelock Van Large commercial vehicle security lock on the rear doors of your loading body by referring to the manual supplied. There are two parts to the lock: you secure the lock catch with two bolts which go through the door and are tightened on a steel plate. The outer part is mounted on the door using four bolts. The bolts go through the door and are tightened on a steel mounting plate.

Materials required: drill, pop riveter, socket spanners and a drill bit. We also supply a drilling template to show you where to drill the holes.

General manual:

Gatelock Van Large manual

Maintenance tips

Gatelock locks require maintenance just like your commercial vehicle. The best thing to do is to lubricate the bolts of your Gatelock security lock with plenty of Vaseline during installation. Take a look at the Gatelock maintenance tips.

UP
Heb je een vraag?
Bel 023 – 554 67 66
App +31 (0) 6 135 582 70
of ga naar contactformulier