How do you calculate how many lashings you need?

CALCULATION TOOL FOR TYING DOWN AND DIAGONAL SECURING

Lashings are used to secure cargo to ensure that it doesn’t move about. Several lashings are required for securing cargo properly. But how do you calculate how many lashings you need? We have a free calculation tool available.

Directly to the lashing calculator

SECURING METHODS USING LASHINGS

To calculate how many lashings you need, first determine which securing method will be used. There are several methods to secure cargo with lashings. The two most commonly used methods are tying down and diagonal securing. Always use lashings that have been certified according to EU standard 12195/2. You also need the cargo weight and the coefficient of friction. The calculation cannot be done without the weight and the coefficient of friction

1. TYING DOWN

For free-standing cargo on road transport you need at least two lashings. The lashings are connected to the loading floor from the one lashing point over the cargo to the other lashing point. This method exerts downward force. For calculating the number of lashings needed, several data are required, such as the vertical angle, coefficient of friction and tensile force.

Vertical angle

Firstly, determine the vertical angle which must be at least 25 degrees. The best result is achieved at an angle of 90 degrees.

Coefficient of friction

The coefficient of friction is dependent on the combination of materials used and the conditions. A dirty loading floor should be avoided. The friction coefficient of 0.6 can only be achieved with certified anti-slip mats.

Tensile force

The tensile force (STF) is the tension that the ratchet can apply to the lashing. This value is always specified on the label of the lashing.

2. DIAGONAL SECURING

Diagonal securing ensures cargo is held in place with four lashings directed forwards, backwards, and across the sides. To do so, use is made of fixed lashing points on the load and on the loading floor. It is important to calculate the correct tensioning capacity of the lashings. Several data are required for this calculation.

Vertical and horizontal angle

First determine the vertical angle, which must be between 20 and 65 degrees. Then determine the horizontal angle, which must be between 6 and 55 degrees.

Coefficient of friction

The coefficient of friction is dependent on the combination of materials used and the conditions. A dirty loading floor should be avoided. The friction coefficient of 0.6 can only be achieved with certified anti-slip mats.

CALCULATION TOOL FOR CARGO SECURING

Using the above data and formulas, the number of lashings and correct tensioning capacity can be calculated. This is even easier using our circular slide rule, which allows you to easily read the required information for cargo securing.

Apply for a FREE lashing calculation tool.

Easily calculate the number of straps required for tying down or the tension capacity for diagonal lashing.

UP
Heb je een vraag?
Bel 023 – 554 67 66
App +31 (0) 6 135 582 70
of ga naar contactformulier